Posted 26 April 2016 - 04:20 PM
Posted 26 April 2016 - 06:16 PM
Posted 26 April 2016 - 06:25 PM
The materials (paint on waterproofing coat, base coat render mixed from powder and top coat render pre mixed in tubs, plus all plastic corner and edge beads) has cost me £5000 for an area just over 200 square metres of wall. Labour will be costing £25 per square metres. So that's a render cost or pretty much £50 per square metre.
Sand and cement whould be cheaper for materials but I would guess similar for the labour.
Edited by ProDave, 26 April 2016 - 06:26 PM.
Posted 26 April 2016 - 06:28 PM
Posted 26 April 2016 - 06:57 PM
Plenty use plastic beads with c&c But you are better with stainless steel beads As c&c on plastic beads are prawn to cracking on the edges and allowing water and frost in Years ago we didn't use beads to eliminate joints
For £32 why not use a K rend or similar Never need to paint unlikely to crack No problem with plastic beads